Add Event

Besides of the three types above, there are also Class Events and Examination Events. These events cannot be created directly in the event management and they are linked with the appropriate class or examination from the course and examination timetabling part of UniTime.

It should be also noted that while even pending meetings block a room from other events to be created, in course and examination timetabling, only approved event meetings are considered. So, it is possible to let people request events in classrooms while a course timetable is still being developed. Once the course timetabling is finished and a timetable is committed, these requests (pending special events) can be processed: not-overlapping events can be approved, overlapping (conflicting) events will need to be moved or rejected.

A file can be attached to an event request as well. This can be used to provide a filled in form or some approval if needed. The need to provide such a file can be listed as a note on a particular room. Such note will show up below the requested meeting in the Meetings table.

If allowed (permission Event Set Expiration), an event can have an expiration date. If set, all pending meetings will get automatically cancelled at midnight after the expiration date. This could give event managers the ability to tentatively book a room for a particular event. All the meetings that are not approved by the event expiration date are automatically cancelled. It is also possible to change or remove the expiration date later on using the Edit Event page.

Event managers have the option to choose whether a confirmation email will be send or not by checking the Send email confirmation checkbox. The checkbox only applies to the particular operation (i.e., the creation of a new event in this case), not to the event as a whole. For the next operation (e.g., using Edit Event page, or approving the event from the Event Detail or the Events page), the Send email confirmation checkbox will be also available. For normal users, an email confirmation is always sent (unless it is disabled globally for everyone by having the application property unitime.email.confirm.event set to false).

Meetings

If there was a selection made on the Events or Event Room Availability page before the Add Event button was clicked, the selection should automatically show up in the list of Meetings. Additional meetings can be also requested using the Add Meetings button. If a meeting is conflicting with another meeting, the conflicting meeting will show up in red below the requested meeting. Such meeting will need to be removed from the request or moved to some other time and/or room as usually only event managers and administrators are allowed to overbook a room (i.e., request a meeting that is conflicting with another, already existing meeting).

One or more meetings can be added for the event by clicking the Add Meetings button. When clicked, the following dialog will appear. The meeting selection works in two steps: first, the user needs to select possible dates, start and end time for the event, and a room filter for the possible rooms where the meeting (or meetings) can take place. Next, the availability matrix will be shown and the individual meetings can be selected from the combination of selected dates x rooms. Only event managers and administrators are able to select meetings that are in a conflict with some other meeting (i.e., there is a red text in the appropriate box).

The first page consists of selection of dates, times, and locations. Dates can be selected by mouse. You can click on a particular day, on a week, on a day of week, or on a whole month. Second click will unselect the selected day. When clicking on a week, a day of week, or a whole month, the selection will iterate between all working days since today, all working days, all days except holiday, all days, and no days. It is usually not possible to request a meeting on days before today (though there is a permission that can override that). It is also possible to use arrow keys to navigate through the calendar and space key to select / unselect a particular day. It is possible to select only dates from the academic session that was selected on the Add Event page. Times define starting and end time of the requested meeting(s). It is possible to use a mouse to select particular times, or the times can be entered by keyboard. While the suggestions are only in 15 minute increments, it is possible to type in a time with 5 minute increments. The "From:" and "To:" time text fields recognize time in various formats (e.g., 7:00 pm can be entered as 7p, 19, 700pm, etc.), the "To:" time can be also entered in the number of minutes or hours from the start time (e.g., 1h for 1 hour, 90m for 90 minutes). The Locations component is explained here (the possible locations are filtered by the same Room Filter as on the Events page). It is useful to keep the Only events locations chip (together with some additional restrictions) in the filter as these are the rooms in which an event can be requested. Once the Next button is pressed, the following page will appear.

It is also possible to get back to the previous page by clicking the Previous button. If there are more rooms available, the « and » buttons will appear to iterate through all of them. The rooms can be also sorted by name, capacity, or availability. The axes can be swapped (showing days horizontally and rooms vertically) and the conflicting information can be expanded to show more details in the grid. These operations are available when clicking the More button.

Once the selection is made, the new meetings will appear in the Meetings table on the Add Event page. It is possible to use the Add Meetings... dialog multiple times, e.g., to be able to request meetings with different times on one event. The requested meetings can be removed from the list by selecting them (click on the check box at the beginning of each line) and clicking Remove under the More button.

The Meetings table can be sorted by each of the columns (click on the column header to change the way the table is sorted), some columns may be removed from the table (click on the column header of the first column, or on the More button).

Event managers may choose whether the meetings in their rooms will be automatically approved or not. The meetings will get automatically approved when Approve New Meetings option is toggled under the More button. The last setting of the toggle is remembered. Note that the toggle is only available if there is at least one new meeting that can be immediately approved. Note that if a new meeting is going to be approved right away, there is new approval instead of new meeting in the Approval column.

If a room (or all rooms of a particular type and department, e.g., all centrally managed classrooms) has a break time defined (see Event Statuses page), the break time translates into a teardown time of a newly requested meeting (in the appropriate room). This means that, for instance, if a 8 am - 9 am meeting is requested in a room that requires 10 minute break time, the allocated time will be 8:00 am - 9:00 am, but the published time will be 8:00 am - 8:50am. This is particularly useful for classrooms as all classes usually have a break time defined (see Time Patterns) and it can be a good practice to extend this policy (e.g., there are always at least 10 minutes between two consecutive classes) to other events as well.

To change setup / teardown times, select a meeting (or meetings) and use the Setup Times... option under the More button. The following dialog will appear where the setup times and break times can be changed.

Course Related Event

When a new course related event is being created, a Courses / Classes section will appear. Here one or more classes, course configurations, course offerings, or instructional offerings can be entered.

When a class is entered, students of the class are expected to attend the course related event etc. The difference between course offerings and instructional offerings is important when a couse is cross-listed. In this case, an instructional offering means students from all courses that are cross-listed, a course offering means students only of the selected course offering. The Students are required to attend this event toggle is important when the course related event (once approved) should show as a conflict with other events of the same students. Such an event (approved course-related event which requires students to attend the event) will also show as a conflict in examination timetabling if there is an exam placed in an overlapping examination period and there are some students in common.

Once there is at least one class, configuration, or offering selected in the list of Courses / Classes, the Enrollments section will appear at the bottom of the page. Here, all students that are attending the selected classes / courses are listed. If some of the students have a conflict with one or more meetings that are added on the new event, the conflict part of the table will appear as well listing all the conflicting events (including their names, types, and conflicting meeting or meetings).

Note that unless the new course-related event is approved and requires student attendance, the student conflicts will only show on the new course-related event. When the event requires student attendance and it is approved, the conflict with the new course-related event will show on the other event as well.

Not-Available Event

The not available event does not need to have a name (it defaults to Not Available) and a main contact (it defaults to the person requesting the event). The only required information is the list of meetings during which the appropriate rooms are not available to other events.